메인 콘텐츠로 이동
로그아웃

환영합니다.

내 계정
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.
로그인 계정 만들기 프리미어 로그인 Partner Program 로그인
문의처

Dell.com 카트

Integrated Dell Remote Access Controller 7 (iDRAC7) Version 1.50.50 User's Guide

PDF

Scheduling Automatic Firmware Update Using Web Interface

To schedule automatic firmware update using Web Interface:
  • NOTE: Do not create the next scheduled occurrence of an automatic update job if a job is already Scheduled. It overwrites the current scheduled job.
  1. In the iDRAC7 Web interface, go to Overview > iDRAC Settings > Update and Rollback . The Firmware Update page is displayed.
  2. Click the Automatic Update tab.
  3. Select the Enable Automatic Update option.
  4. Select any of the following options to specify if a system reboot is required after the updates are staged:
    • Schedule Updates — Stage the firmware updates but do not reboot the server.
    • Schedule Updates and reboot Server — Enables server reboot after the firmware updates are staged.
  5. Select any of the following to specify the location of the firmware images:
    • Network — Use the catalog file from a network share (CIFS or NFS). Enter the network share location details.
    • FTP — Use the catalog file from the FTP site. Enter the FTP site details.
  6. Based on the selection in step 5, enter the network settings or the FTP settings. For information about the fields, see the iDRAC7 Online Help.
  7. In the Update Window Schedule section, specify the start time for the firmware update and the frequency of the updates (daily, weekly, or monthly). For information about the fields, see the iDRAC7 Online Help.
  8. Click Schedule Update. The next scheduled job is created in the job queue. Five minutes after the first instance of the recurring job starts, the job for the next time period is created.

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.