Creating a Partition
Using an Image File Using Web Interface
a vFlash partition from an image file:
In iDRAC7 Web interface, go to
Create From Image.
Create Partition from Image File page is displayed.
Enter the required information and click
Apply. For information about the options, see the
iDRAC7 Online Help.
A new partition is created. For CD emulation type, a read-only
partition is created. For Floppy or Hard Disk emulation type, a read-write
partition is created. An error message is displayed if:
The card is write-protected
The label name matches the label of an existing partition.
The size of the image file is greater than 4GB or exceeds the
available space on the card.
The image file does not exist or the image file extension is neither
.img nor .iso.
An initialize operation is already being performed on the card.