Empty Partition Using the Web Interface
an empty vFlash partition:
In iDRAC7 Web interface, go to
Create Empty Partition.
Create Empty Partition page
Specify the required information and click
Apply. For information about the options, see the
iDRAC7 Online Help.
A new unformatted empty partition is created that is read-only
by default. A page indicating the progress percentage is displayed.
An error message is displayed if:
The card is write-protected.
The label name matches the label of an existing partition.
A non-integer value is entered for the partition size, the value
exceeds the available space on the card, or the partition size is
greater than 4 GB.
An initialize operation is being performed on the card.