System Using Remote File Share
deploy the operating system using Remote File Share (RFS), make sure
Access Virtual Media privileges for iDRAC7
are enabled for the user.
Network share contains drivers and operating system bootable image
file, in an industry standard format such as
NOTE: While creating
the image file, follow standard network-based installation procedures,
and mark the deployment image as read-only to make sure that each
target system boots and executes the same deployment procedure.
To deploy an operating system using RFS:
Using Remote File Share (RFS), mount the ISO or IMG image
file to the managed system through NFS or CIFS.
First Boot Device.
Set the boot order in the
First Boot Device drop-down list to
Remote File Share.
Boot Once option to enable
the managed system to reboot using the image file for the next instance
Reboot the managed system and follow the on-screen instructions
to complete the deployment.