The following table lists the interfaces to access iDRAC7.
Interface or Protocol
iDRAC Settings Utility
Use the iDRAC Settings utility to perform pre-OS operations. It has a subset of the features that are available in iDRAC7 Web interface along with other features.
To access iDRAC Settings utility, press < F2> during boot and then click iDRAC Settings on the System Setup Main Menu page.
iDRAC7 Web Interface
Use the iDRAC7 Web interface to manage iDRAC7 and monitor the managed system. The browser connects to the Web server through the HTTPS port. Data streams are encrypted using 128-bit SSL to provide privacy and integrity. Any connection to the HTTP port is redirected to HTTPS. Administrators can upload their own SSL certificate through an SSL CSR generation process to secure the Web server. The default HTTP and HTTPS ports can be changed. The user access is based on user privileges.
Use this command line utility to perform iDRAC7 and server management. You can use RACADM locally and remotely.
Server LCD Panel/Chassis LCD Panel
Use the LCD on the server front panel to:
For blade servers, the LCD is on the chassis front panel and is shared between all the blades.
To reset iDRAC without rebooting the server, press and hold the System Identification button for 16 seconds.
CMC Web Interface
In addition to monitoring and managing the chassis, use the CMC Web interface to:
Use Lifecycle Controller to perform iDRAC7 configurations. To access Lifecycle Controller, press <F10> during boot and go to System Setup > Advanced Hardware Configuration > iDRAC Settings. For more information, see Lifecycle Controller User’s Guide available at dell.com/support/manuals.
Use Telnet to access iDRAC7 where you can run RACADM and SMCLP commands. For details about RACADM, see RACADM Command Line Reference Guide for iDRAC7 and CMC available at dell.com/support/manuals. For details about SMCLP, see Using SMCLP.
Use SSH to run RACADM and SMCLP commands. It provides the same capabilities as the Telnet console using an encrypted transport layer for higher security. The SSH service is enabled by default on iDRAC7. The SSH service can be disabled in iDRAC7. iDRAC7 only supports SSH version 2 with DSA and the RSA host key algorithm. A unique 1024-bit DSA and 1024-bit RSA host key is generated when you power-up iDRAC7 for the first time.
Use the IPMITool to access the remote system’s basic management features through iDRAC7. The interface includes local IPMI, IPMI over LAN, IPMI over Serial, and Serial over LAN. For more information on IPMITool, see the Dell OpenManage Baseboard Management Controller Utilities User’s Guide at dell.com/support/manuals.
Use the Virtual Media Command Line Interface (VMCLI) to access a remote media through the management station and deploy operating systems on multiple managed systems.
Use Server Management Workgroup Server Management-Command Line Protocol (SMCLP) to perform systems management tasks. This is available through SSH or Telnet. For more information about SMCLP, see Using SMCLP.
The LC-Remote Services is based on the WS-Management protocol to do one-to-many systems management tasks. You must use WS-MAN client such as WinRM client (Windows) or the OpenWSMAN client (Linux) to use the LC-Remote Services functionality. You can also use Power Shell and Python to script to the WS-MAN interface.
Web Services for Management (WS-Management) is a Simple Object Access Protocol (SOAP)–based protocol used for systems management. iDRAC7 uses WS–Management to convey Distributed Management Task Force (DMTF) Common Information Model (CIM)–based management information. The CIM information defines the semantics and information types that can be modified in a managed system. The data available through WS-Management is provided by iDRAC7 instrumentation interface mapped to the DMTF profiles and extension profiles.
For more information, see the following: