Directory Settings Using iDRAC7 Web Interface
To test the
Active Directory settings:
In iDRAC7 Web Interface, go to
iDRAC Settings >
User Authentication >
Directory Services >
Microsoft Active Directory.
Active Directory summary page
Enter a test user's name (for example,
email@example.com) and password and click
Start Test. A detailed
test results and the test log displays.
If there is a failure in any step, examine the details in
the test log to identify the problem and a possible solution.
NOTE: When testing Active
Directory settings with Enable Certificate Validation checked, iDRAC7
requires that the Active Directory server be identified by the FQDN
and not an IP address. If the Active Directory server is identified
by an IP address, certificate validation fails because iDRAC7 is not
able to communicate with the Active Directory server.