Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell PowerEdge M630 Systems (VRTX Enclosure) Owner's Manual

PDF

Removing the PCIe mezzanine card

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

  1. Follow the safety guidelines listed in safety instructions section.

  2. Follow the procedure listed in the Before working inside your system section.

Steps

  1. Open the retention latch by pressing the ridged area on the retention latch, and lifting the latch up.
    CAUTION: To prevent damage to the PCIe mezzanine card, you must hold the card only by its edges.
  2. Lift the PCIe mezzanine card up and away from the system.
  3. Close the retention latch.
    Figure 1. Removing the PCIe mezzanine card
    This figure shows removing the PCIe mezzanine card
    1. PCIe mezzanine card (2)
    2. connector (2)
    3. ridge area on the retention latch

Next steps

  1. Install the PCIe mezzanine card.

  2. Follow the procedure listed in the After working inside your system section.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\