- Notes, cautions, and warnings
- Release summary
- Compatibility
- New and enhanced features
- Fixes
- Important notes
- Known issues — To be fixed in future releases
- Storage devices not found in iDRAC
- Hot-plugged PCIe SSDs not detected
- NIC or FC device slot listed in hardware inventory even when disabled in BIOS
- <Keyboard_Mouse_USB_reset_warning> button in Virtual Console with Java plug-in
- Firmware update job name in Tasks Redfish API showing as "Firmware Update"
- Foreign Preview not found & not able to clear the foreign config on storage controller in iDRAC
- GracefulRestart performs ForcefulRestart in Redfish API
- Get operation not displaying model or serial number for PCIe devices
- IP address missing in iDRAC
- Unable to set Power cap values in Lockdown mode
- Incorrect firmware version displayed after the update
- iDRAC not detecting Virtual disks in eHBA Mode
- Legacy attribute System.Embedded.1#Diagnostics.1#OSAppCollectionTime displays incorrect time
- iDRAC Direct Port accessible even after the port is turned off
- Getting an error while downloading DUP using Redfish interface
- Updates through Redfish Simple Update Transfer Protocol failing
- Getting partial screen on online video player
- Unsupported RAID level displayed
- SEL not reporting drive events
- SEL logs in the setup menu and LC logs in the iDRAC GUI not matching
- MaxReadingRange and MinReadingRange for Readingvolts attributes displayed incorrectly
- iDRAC DUP update fails on SLES when secure boot is enabled
- CPLD update repeats three times
- Boot mode error during OS deployment
- Header error while using Powershell for Redfish requests
- Port 5353 blocked by iDRAC internal firewall and appears as Open|Filtered
- Repetitive PR7 messages related to PSU in LC logs after a system erase operation
- Qlogic Fiber channel device Link Status displayed as Unknown or Unavailable
- Persistent Memory displayed after removing Apache Pass DIMM (AEP)
- iDRAC IP changes to 0.0.0.0 temporarily during power cycles
- After a warm reboot, LC logs display Disk Inserted
- SMART not reporting for some drives
- Limitations
- Updating iDRAC firmware
- Lifecycle Controller Remote Services — client tools
- Resources and support
- Contacting Dell EMC
iDRAC9 with Lifecycle Controller Version 3.42.42.42 Release Notes
Release summary
This release adds support for 2nd Generation AMD EPYC architecture.
Version
iDRAC9 with LC 3.42.42.42
Release date
October 2019
To download this version of iDRAC, see Downloading iDRAC firmware installation file.
NOTE: : For details about the previous releases, if applicable, or to determine the most recent release for your platform, and for latest documentation version, see KB article SLN308699 available at www.dell.com/idracmanuals.
Geef een beoordeling (1-5 sterren).
Geef een beoordeling (1-5 sterren).
Geef een beoordeling (1-5 sterren).
Selecteer of het artikel nuttig is of niet.
Opmerkingen mogen geen speciale tekens bevatten: <>() \