iDRAC10 Version 1.30.xx User's Guide
- Notes, cautions, and warnings
- Revision history
- Overview of iDRAC
- Benefits of using iDRAC
- Key features
- New features added
- Deprecated features
- How to use this guide
- Supported web browsers
- iDRAC licenses
- Licensed features in iDRAC10
- PLDM support in iDRAC
- Interfaces and protocols to access iDRAC
- iDRAC port information
- Other documents you may need
- Contacting Dell
- Access documents from the Dell Support site
- Access Redfish API
- Setting up iDRAC IP address
- Validate the system during boot
- Start the iDRAC system setup
- Validate firmware and licensing
- Configure network settings
- View system event log
- Validate alerts settings
- Validate media and USB port settings
- Validate the hardware configuration
- Validate power and thermal settings
- Validate user and communication settings
- Validate reset settings
- Validate lockdown settings
- Configure the root password
- Complete the setup
- Logging in to iDRAC
- Log in to iDRAC using OpenID Connect
- Log in to iDRAC as local user, Active Directory user, or LDAP user
- Force Change of Password (FCP)
- Access iDRAC using remote RACADM
- Access iDRAC using Local RACADM
- Access iDRAC using firmware RACADM
- RSA SecurID 2FA
- View system health
- Log in to iDRAC using public key authentication
- Multiple iDRAC sessions
- Secure default password
- Change the default login password
- Enable or disable default password warning message
- IP Blocking
- Enable or disable an operating system to iDRAC Pass-through using web interface
- Setting up managed system
- Set up managed system location
- Optimize system performance and power consumption
- Set up management station
- Configure supported web browsers
- View localized versions of web interface
- Firmware updates
- Firmware image files and supported tools
- Considerations for PSU firmware updates
- Methods for firmware updates
- LC logs during firmware updates
- iLKM and SEKM considerations
- Update firmware using iDRAC web interface
- Schedule automatic firmware updates
- Configure quick reboot after firmware updates
- Update device firmware using RACADM
- Update firmware using DUP
- Update firmware using remote RACADM
- Update firmware on NVIDIA ConnectX8
- Rebootless updates
- Binary image updates using Redfish Multipart
- View and managing staged updates
- Roll back device firmware
- Easy Restore
- Monitor iDRAC using other Systems Management tools
- Support Server Configuration Profile—Import and Export
- Secure Boot Configuration from BIOS Settings or F2
- BIOS recovery
- Recover iDRAC
- Data Processing Unit (DPU)
- Plugin Management
- Configuring iDRAC
- View iDRAC information
- Modify network settings
- Cipher suite selection
- FIPS mode
- Configure services
- Use VNC client to manage remote server
- Configure time zone and NTP
- Set first boot device
- Enable or disable OS to iDRAC Pass-through
- Obtain certificates
- Configure multiple iDRACs using RACADM
- Disable access to modify iDRAC configuration settings on host system
- HTTP Basic Authentication
- Authorization using OAuth 2.0
- Viewing iDRAC and managed system information
- View managed system health and properties
- Configure Asset Tracking
- View system inventory
- View system components
- Monitoring performance index of CPU, memory, and input output modules
- Read Firmware and Hardware inventories
- Perform and check system or component configuration status
- Perform and check firmware update status
- GPU (Accelerators) Management
- Check system for Fresh Air compliance
- View historical temperature data
- Configure warning threshold for inlet temperature
- View network interfaces available on host OS
- Viewing or terminating iDRAC sessions
- Setting up iDRAC communication
- Communicate with iDRAC through serial connection using a DB9 cable
- Configure BIOS for a serial connection
- Enable RAC serial connection
- Enable IPMI serial connection basic and terminal modes
- Switch between RAC serial and serial console while using DB9 cable
- Communicate with iDRAC using IPMI SOL
- Communicating with iDRAC using IPMI over LAN
- Enable or disable remote RACADM
- Disabling local RACADM
- Configuring Linux for serial console during boot in RHEL
- Configuring a serial terminal in RHEL
- Supported SSH cryptography schemes
- Communicate with iDRAC through serial connection using a DB9 cable
- User roles and user accounts
- iDRAC user roles and privileges
- Recommended characters in usernames and passwords
- Create user roles
- Edit user roles
- Configure local users
- Configure Active Directory users
- Configuring generic LDAP users
- Testing LDAP directory service settings
- Register the OpenID Connect system
- System Configuration Lockdown mode
- Configuring iDRAC to send alerts
- Enabling or disabling alerts
- Configuring Quick Alerts
- Configuring alerts for different categories
- Configuring event alerts
- Setting alert recurrence event
- Configuring email alert, SNMP trap, or IPMI trap settings
- Configuring Redfish Eventing
- Configuring Remote System Logging
- Alerts message IDs
- Liquid cooling leak detection
- Managing logs
- Monitoring and managing power in iDRAC
- iDRAC Direct Updates
- Inventorying, monitoring, and configuring network devices
- Inventorying and monitoring FC HBA devices
- Inventorying and monitoring network devices
- Inventorying and monitoring SFP transceiver devices
- Telemetry Streaming
- Serial Data Capture
- Port metrics for QSFP-DD transceivers
- Dynamic configuration of virtual addresses, initiator, and storage target settings
- SSD Wear Threshold
- Configuring persistence policy settings
- Download Network Dump
- Managing storage devices
- Understanding RAID concepts
- Supported controllers
- Summary of supported features for storage devices
- Inventorying and monitoring storage devices
- Viewing storage device topology
- Managing physical disks
- Converting a physical disk to RAID or non-RAID mode
- Erasing physical disks
- Erasing SED/ISE device data
- Rebuild Physical Disk
- Managing virtual disks
- RAID Configuration Features
- Managing controllers
- HBA adapter operations
- Monitoring predictive failure analysis on drives
- Controller operations in non-RAID mode or HBA mode
- Running RAID configuration jobs on multiple storage controllers
- Manage Preserved cache
- System Firmware Intermediary
- Managing PCIe SSDs
- Managing enclosures or backplanes
- Storage devices — apply operation scenarios
- Blink or unblink component LEDs
- Warm reboot
- BIOS Settings
- Virtual console
- Using iDRAC Service Module
- Using Type-C USB Dual-Mode port for server management
- Using Quick Sync 2
- Managing virtual media
- Installing operating systems
- Troubleshooting managed system using iDRAC
- SupportAssist Integration in iDRAC
- Frequently asked questions
- Use case scenarios
- Troubleshooting an inaccessible managed system
- Obtaining system information and assess system health
- Viewing and exporting System Event Log and Lifecycle Log
- Interfaces to update iDRAC firmware
- Performing a graceful shutdown
- Creating new administrator user account
- Launching servers remote console and mounting a USB drive
- Installing bare metal OS using attached virtual media and remote file share
- Managing rack density
- Installing new electronic license
- Applying IO Identity configuration settings for multiple network cards in single host system reboot
Bezig met laden, een ogenblik geduld
Revision history
| Date | Document revision | Description of changes |
|---|---|---|
| June, 2026 | A02 | iDRAC10 version 1.30.30.50 |
| March, 2026 | A01 | iDRAC10 version 1.30.10.50 |
| January, 2026 | A00 | iDRAC10 version 1.30.03.10 |
Data zijn niet beschikbaar voor het onderwerp
Geef een beoordeling (1-5 sterren).
Geef een beoordeling (1-5 sterren).
Geef een beoordeling (1-5 sterren).
Selecteer of het artikel nuttig is of niet.
Opmerkingen mogen geen speciale tekens bevatten: <>() \