Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners

Sus carritos de compra de Dell.com

Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

PDF

Configuring the Caradigm Vault Server

To configure the Caradigm Vault Server on ThinOS:
  1. From the desktop menu, click System Setup, and then click Remote Connections. The Remote Connections dialog box is displayed.
  2. Click the Authentication tab, click the Caradigm button, enter the IP address of the SSO & CM Server , and then click OK.
  3. On the Caradigm Vault Server, use the following guidelines:
    • Ensure that the Enroll unenrolled badges option is checked.

    • Make sure that all Badge ID mapping entries are deleted.

  4. Click SSO&CM > Advanced Configurations , and use the following guidelines:

    1. Ensure that the Enable Proximity Support check box is selected.
    2. Ensure that the Enable way2care check box is selected.
  5. To prepare a certificate to the Caradigm Vault Server, use the following guidelines: The Caradigm Vault Server uses the certificate to validate the connection between the Tap Server and the thin client.
    1. To raise a request for the certificate:
      • The certificate should be issued by your Certificate Authority.
      • Prepare the certificate in two formats:
        • PFX format which has a private key.

        • The other is PEM format which is text-based, Base64-encoded DER file. For Example, Caradigm.cer, Caradigm.pfx.

    2. To import a certificate to the thin client, use either of the following two options:
      • Click System Setup > System tools > Certificates to import certificates from USB storage or file server.
      • Use INI file to import certificate. 
        AddCertificate=client_cert.pfx password=passpass
    3. To add a certificate to Vault server:

      Use the Thin Client Certificates page to add certificates for the thin client devices. The certificate must be a text in PEM format, that is, a text-based Base64-encoded DER file.
      • Open the DER cert file on Notepad.

      • Log in to the Vault Server Admin Console, and then click Appliance > Thin Client Certificates.

      • Copy the Notepad text to the Vault server

Configuration on VDI Server and Desktops

Caradigm solution of ThinOS supports the multi-types of VDI server such as VMware View Horizon 6, Citrix XenApp 6.5, Citrix XenDesktop 5.6 and Citrix XenDesktop 7.6.

To configure the VDI server and desktop:
  • Install the Caradigm desktop components in the servers and desktops.

  • Indicate vault server IP, and then provide a valid security token.

  • Add following lines to Service section of the \programdata\sentillion\vergence\Authenticator.ini configuration file . 
    TapServerIdentification=True
                                             RemotePromptForPassword=Badge
  • NOTE:

    From ThinOS 8.2, Wyse 5010 thin client with PCoIP (D10DP), Wyse 5040 AIO thin client with PCoIP (5213), from ThinOS 8.3, Wyse 3030 LT thin client with PCoIP, and from ThinOS 8.3.1 Wyse 5060 thin client with PCoIP offer Caradigm SSO over PCoIP.

    SSO and CM client installed on your VDI server and desktops must be upgraded to latest version 6.2.5 in order to support this feature.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"