OptiPlex 3000 Thin Client Antenna Installation Guide

PDF

Before you begin

Steps

  1. Save and close all open files and exit all open applications.
  2. Shut down your system: Click Start > Image: Power button Power > Shut down.
    NOTE If you are using a Linux operating system, see the documentation of your operating system for shut-down instructions.
  3. Disconnect your system and all attached devices from their electrical outlets.
  4. Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your system.
    CAUTION To disconnect a network cable, first unplug the cable from your system and then unplug the cable from the network device.
  5. If the system unit or the adapter is being installed on the monitor:
    1. Disconnect the power and all the display cables from the monitor.
    2. Remove the stand from the monitor and place the monitor on a clean and soft surface.

Oceń tę zawartość

Trafne
Przydatne
Łatwe do zrozumienia
Czy ten artykuł był przydatny?
0/3000 characters
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Określ, czy artykuł były przydatny, czy nie.
  Komentarze nie mogą zawierać znaków specjalnych: <>()\