Avançar para o conteúdo principal
  • Efetuar encomendas de forma rápida e fácil
  • Ver todas as encomendas e controlar o seu estado de expedição
  • Criar e aceder a uma lista dos seus produtos

Dell OpenManage Deployment Toolkit Version 4.3 User's Guide

PDF

Deployment Using Customized Embedded Linux

Make sure that you have the following basic libraries, Dell toolkit libraries, tools, and utilities required for DTK and integrate them to your embedded Linux deployment environment to proceed with the deployment:

  • Drivers for all hardware installed in the embedded Linux. These drivers are available at support.dell.com.
  • Serial port configuration utilities ( setserial and stty) for racadm.
  • Installed and working instrumentation drivers from /mnt/cdrom/tools.
  • Point-to-Point Protocol (PPP) tools.
  • Basic libraries and utilities for Linux to execute customized scripts.
  • Installed DTK and the dependency RPMs.
  • Necessary entries in the ld.so.config file so that the libraries are installed.

Integrate all the above mentioned libraries, Dell toolkit libraries, tools, and utilities into your embedded Linux environment and proceed with deployment.

  • NOTE: For more information on how Dell‑provided utilities and drivers are installed, see start-stage3.sh, start-hapi.sh, or start-raid.sh available in /mnt/cdrom/tools.
  • NOTE: The /opt/dell/srvadmin/sharedand /opt/dell/srvadmin/hapi directories must have read-write permissions. For more details, see start-stage3.sh and start-hapi.sh.

Classifique este conteúdo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
0/3000 characters
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Selecione se o artigo foi útil ou não.
  Os comentários não podem conter estes caracteres especiais: <>()\