Перейти к основному содержимому
  • Простое и быстрое размещение заказов
  • Просмотр заказов и отслеживание состояния доставки
  • Создание списка продуктов и доступ к нему
  • Управление узлами, продуктами и контактами уровня продуктов Dell EMC с помощью Company Administration.

XPS 13 Service Manual

Procedure

  1. Slide the I/O board at an angle and then align the screw holes on the I/O board with the screw holes on the palm-rest assembly.
  2. Adhere the tape that secures the I/O board.
  3. Align the screw hole on the display cable with the screw hole on the I/O board.
  4. Replace the two screws (M1.6x3) that secure the I/O board to the palm-rest assembly.
  5. Slide the I/O-board cable into the I/O board and close the latch to secure the cable.
  6. Slide the fingerprint-reader cable (optional) into the I/O board and close the latch to secure the cable.
  7. Connect the media-card reader cable to the connector on the I/O board.
  8. Adhere the tape that secures the display cable to the I/O board.

Оценить этот контент

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
0/3000 characters
  Поставьте оценку (1–5 звезд).
  Поставьте оценку (1–5 звезд).
  Поставьте оценку (1–5 звезд).
  Выберите ответ на вопрос, была ли статья полезной.
  Комментарии не должны содержать следующие специальные символы: <>()\