XPS 13 Service Manual

System diagnostic lights

Power and battery-status light

Indicates the power and battery-charge status.

Solid white—Power adapter is connected and the battery has more than 5 percent charge.

Solid amber—Computer is running on battery and the battery has less than 5 percent charge.

Off

Power adapter is connected and the battery is fully charged.
Computer is running on battery and the battery has more than 5 percent charge.
Computer is in sleep state, hibernation, or turned off.

The power and battery-status light blinks amber along with beep codes indicating failures.

For example, the power and battery-status light blinks amber two times followed by a pause, and then blinks white three times followed by a pause. This 2,3 pattern continues until the computer is turned off indicating no memory or RAM is detected.

The following table shows different power and battery-status light patterns and associated problems.

Table 1. Diagnostics. The following table provides the different light patterns and what they indicate.
Light pattern	Problem description
2,1	CPU failure
2,2	System board: BIOS and ROM failure
2,3	No memory or RAM detected
2,4	Memory or RAM failure
2,5	Invalid memory installed
2,6	System board or chipset error
2,7	LCD failure
3,1	CMOS battery failure
3,2	PCI or video card or chip failure
3,3	Recovery image not found
3,4	Recovery image found but invalid

Camera status light: Indicates whether the camera is in use.

Solid white—Camera is in use.
Off—Camera is not in use.

Caps Lock status light: Indicates whether Caps Lock is enabled or disabled.

Solid white—Caps Lock enabled.
Off—Caps Lock disabled.

Добро пожаловать

Добро пожаловать в Dell

XPS 13 Service Manual

System diagnostic lights

Оценить этот контент