Перейти к основному содержимому
  • Простое и быстрое размещение заказов
  • Просмотр заказов и отслеживание состояния доставки
  • Создание списка продуктов и доступ к нему
  • Управление узлами, продуктами и контактами уровня продуктов Dell EMC с помощью Company Administration.

Dell Latitude 5310 2-in-1 Service Manual

Removing the touchpad button board

Prerequisites

  1. Follow the procedure in before working inside your computer.
  2. Remove the microSD card.
  3. Remove the base cover.
  4. Remove the battery.
  5. Remove the speaker.
  6. Remove the LED board.
    NOTE Removal of system board and heatsink are not required to remove the touchpad button board.

Steps

  1. Open the latch and disconnect the touchpad button board cable from the connector on the touchpad board.
    Removing the touchpad button board.
  2. Remove the two (M2x3) screws that secure the touchpad button bracket to the palmrest [1].
  3. Lift the touchpad button board bracket away from the computer [2].
    Removing the touchpad button board.

Оценить этот контент

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
0/3000 characters
  Поставьте оценку (1–5 звезд).
  Поставьте оценку (1–5 звезд).
  Поставьте оценку (1–5 звезд).
  Выберите ответ на вопрос, была ли статья полезной.
  Комментарии не должны содержать следующие специальные символы: <>()\