Vostro 5501 Setup and specifications guide

Storage

Table 1. Storage optionsThe table describes the storage options.
Option Description
SATA Operation

Allows you to configure the operating mode of the integrated SATA hard drive controller.

The options are:

  • Disabled
  • AHCI
  • RAID On—By default, the RAID On option is enabled.
NOTE: SATA is configured to support RAID mode.
Storage Interface

Allows you to enable or disable various drives on board.

The options are:

  • M.2 PCIe SSD-1
  • M.2 PCIe SSD-0

By default, all the options are enabled.

SMART Reporting

This field controls whether hard drive errors for integrated drives are reported during system startup. This technology is part of the Self Monitoring Analysis and Reporting Technology (SMART) specification. By default, the Enable SMART Reporting option is disabled .

Drive Information

Provides information about drive type and device.


Оценить этот контент

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
0/3000 characters
  Поставьте оценку (1–5 звезд).
  Поставьте оценку (1–5 звезд).
  Поставьте оценку (1–5 звезд).
  Выберите ответ на вопрос, была ли статья полезной.
  Комментарии не должны содержать следующие специальные символы: <>()\