Vostro 5501 Setup and specifications guide

Update and Recovery

Table 1. Update and recoveryThe table describes the update and recovery information.
Option Description
UEFI Capsule Firmware Updates

Allows you to update the system BIOS through UEFI capsule update packages.

Enable UEFI Capsule Firmware Updates - By default, this option is enabled.

BIOS Recovery from Hard Drive

Allows you to recover BIOS on the primary hard drive or USB drive in corrupted conditions.

BIOS Recovery from Hard Drive - By default, this option is enabled.

NOTE: BIOS Recovery from hard drives is not available for Self-Encrypting Drives (SED).
BIOS Downgrade

Allows you to control flashing of the system firmware to previous versions.

Allow BIOS Downgrade - By default, this option is enabled.

SupportAssist OS Recovery

Allows you to enable or disable the boot flow for SupportAssist OS Recovery if there are certain system errors.

SupportAssist OS Recovery - By default, this option is enabled.

NOTE: If SupportAssist OS Recovery setup option is disabled, then all the automatic boot flow for SupportAssist OS Recovery tool is disabled.
BIOSConnect

Allows you to recover cloud service operating system if the main operating system and/or local service operating system fails to boot with the number of failures equal to or greater than the value specified by the Auto operating system Recovery Threshold setup.

BIOSConnect - By default, this option is enabled.

Dell Auto OS Recovery Threshold

The Auto OS Recovery threshold setup options control the automatic flow for SupportAssist System Resolution Console and for Dell OS Recovery Tool.

The options are:
  • Off
  • 1
  • 2 - Default
  • 3

Оценить этот контент

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
0/3000 characters
  Поставьте оценку (1–5 звезд).
  Поставьте оценку (1–5 звезд).
  Поставьте оценку (1–5 звезд).
  Выберите ответ на вопрос, была ли статья полезной.
  Комментарии не должны содержать следующие специальные символы: <>()\