Skip to main content

XPS 13 9300 Service Manual

Screw list

NOTE When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a component.

NOTE Screw color may vary with the configuration ordered.

Table 1. Screw listThe following table provides the different screws used in your computer.
Component	Secured to	Screw type	Quantity	Screw image
Base cover	Palm-rest and keyboard assembly	M2x3, Torx 5	8
Battery	Palm-rest and keyboard assembly	M1.6x2.5	5
Solid-state drive bracket	System board	M2x3	1
Fans	System board	M1.6x2.5	4
Display-assembly cable holder	System board	M1.2x2	3
Display-assembly hinges	Palm-rest and keyboard assembly	M2.5x4.5	6
System board	Palm-rest and keyboard assembly	M1.6x1.5	4
System board	Palm-rest and keyboard assembly	M1.2x2	3
System board	Palm-rest and keyboard assembly	M1.4x4	4