Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

System Profile Settings

Table 1. System Profile Settings Options
Group	Option	Valid Arguments	Description
System Profile Settings	`--MemFrequency`	`MaxPerf, 1600MHz, 1333MHz, 1067MHz, 800MHz, MaxReliability`	Sets the Memory Frequency as maximum performance, 1600 Mhz, 1333 MHz, 1067 MHz, 800 MHz, or maximum reliability.
	`--MemPatrolScrub`	`Standard, Extended, Disabled`	Sets the Memory Patrol Scrub frequency as `Standard Mode`, `Extended Mode`, or `Disabled`.
	`--MemRefreshRate`	`1x, 2x`	Sets the Memory Refresh Rate as `1x` or `2x`.
	`--MemVolt`	`AutoVolt, Volt15V, Volt135V` NOTE: Volt15V represents 1.5 Volt and Volt135V represents 1.35 Volt.	Sets the DIMM voltage selection.
	`--ProcC1E`	`Enabled, Disabled`	When set to `Enabled`, the processor is allowed to switch to minimum performance state when idle.
	`--ProcCStates`	`Enabled, Disabled`	When set to `Enabled`, the processor can operate in all available power states.
	`--ProcPwrPerf`	`MaxPerf, MinPwr, SysDbpm, OsDbpm`	Sets CPU Power Management to maximum performance, operating system DBPM, or System DBPM (DAPC).
	`--ProcTurboMode`	`Enabled, Disabled`	When set to `Enabled`, the processor can operate in Turbo Boost Mode.
	`--SysProfile`	`PerfPerWatt OptimizedOs, PerfPerWatt OptimizedDapc, PerfOptimized, Custom, DenseCfg Optimized`	Sets the System Profile to Performance Optimized, Power Optimized (DAPC), Power Optimized (OS), Dense Configuration Optimized, or Custom mode. When set to a mode other than Custom, BIOS will set each option accordingly. When set to Custom, you can change setting of each option.