Ana içeriğe atla
Oturumu Kapat

Dell'e Hoş Geldiniz

Hesabım
  • Hızla ve kolayca sipariş verin
  • Siparişleri görüntüleyin ve kargonuzun durumunu izleyin
  • Ürünlerinizin listesini oluşturun ve listeye erişin
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Oturum Aç Hesap oluşturun Premier Oturum Açma İş Ortağı Programı Oturum Açma
Bize Ulaşın

Integrated Dell Remote Access Controller 7 (iDRAC7) Version 1.50.50 User's Guide

PDF

Enabling or Disabling OS to iDRAC Pass-through Using Web Interface

To enable OS to iDRAC Pass-through using Web interface:
  1. Go to Overview > iDRAC Settings > Network > OS to iDRAC Pass-through . The OS to iDRAC Pass-through page is displayed.
  2. Select any of the following options to enable OS to iDRAC pass-through:
    • LOM — The OS to iDRAC pass-through link between the iDRAC and the host operating system is established through the LOM or NDC.
    • USB NIC — The OS to iDRAC pass-through link between the iDRAC and the host operating system is established through the internal USB bus.
    To disable this feature, select Disabled.
  3. If you select LOM as the pass-through configuration, and if the server is connected using dedicated mode, enter the IPv4 address of the operating system. The default value is 0.0.0.0.
    • NOTE: If the server is connected in shared LOM mode, then the OS IP Address field is disabled.
  4. If you select USB NIC as the pass-through configuration, enter the IP address of the USB NIC. The default value is 169.254.0.1. It is recommended to use the default IP address. However, if this IP address conflicts with an IP address of other interfaces of the host system or the local network, you must change it.
  5. Click Apply to apply the settings.
  6. Click Test Network Configuration to check if the IP is accessible and the link is established between the iDRAC and the host operating system.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\