Displays the service tag of your computer.
Allows you to create a system asset tag if an
asset tag is not already set.
This option is not set by default.
Allows you to flash previous revisions of the system firmware.
This option is set by default.
BIOS Recovery from Hard Drive—This option is set by default. Allows you to recover the corrupted BIOS from a recovery file on the HDD or an external USB key.
BIOS Auto-Recovery— Allows you to recover the BIOS automatically.
NOTE: : BIOS Recovery from Hard Drive field should be enabled.
Always Perform Integrity Check—Performs integrity check on every boot.