to this guide, the following documents available on the Dell Support
dell.com/support/manuals provide additional information
about the setup and operation of iDRAC in your system.
iDRAC Online Help provides detailed information about
the fields available on the iDRAC web interface and the descriptions
for the same. You can access the online help after you install iDRAC.
iDRAC8 RACADM Command Line Interface Reference Guide provides information about the RACADM sub-commands, supported interfaces,
and iDRAC property database groups and object definitions.
iDRAC RACADM Support Matrix provides the list of sub
commands and objects that are applicable for a particular iDRAC version.
Systems Management Overview Guide provides brief information
about the various software available to perform systems management
Dell Lifecycle Controller Graphical User Interface For
12th and 13th Generation Dell PowerEdge Servers User’s Guide
information on using Lifecycle Controller Graphical User Interface
Dell Lifecycle Controller Remote Services For 12th and
13th Generation Dell PowerEdge Servers Quick Start Guide
an overview of the Remote Services capabilities, information on getting
started with Remote Services, Lifecycle Controller API, and provides
references to various resources on Dell TechCenter.
Dell Remote Access Configuration Tool User’s Guide provides
information on how to use the tool to discover iDRAC IP addresses
in your network and perform one-to-many firmware updates and active
directory configurations for the discovered IP addresses.
Dell Systems Software Support Matrix provides information
about the various Dell systems, the operating systems supported by
these systems, and the Dell OpenManage components that can be installed
on these systems.
iDRAC Service Module Installation Guide provides information
to install the iDRAC Service Module.
Dell OpenManage Server Administrator Installation Guide contains instructions to help you install Dell OpenManage Server
Dell OpenManage Management Station Software Installation
contains instructions to help you install Dell OpenManage
management station software that includes Baseboard Management Utility,
DRAC Tools, and Active Directory Snap-In.
Dell OpenManage Baseboard Management Controller Management
Utilities User’s Guide
has information about the IPMI interface.
Release Notes provides last-minute updates to the system
or documentation or advanced technical reference material intended
for experienced users or technicians.
Glossary provides information about the terms used
in this document.
The following system documents are available to provide
The safety instructions that came with your system provide important
safety and regulatory information. For additional regulatory information,
see the Regulatory Compliance home page at
dell.com/regulatory_compliance. Warranty information may be included within this document or as
a separate document.
Rack Installation Instructions included with your rack
solution describe how to install your system into a rack.
Getting Started Guide provides an overview of system
features, setting up your system, and technical specifications.
Owner’s Manual provides information about system features
and describes how to troubleshoot the system and install or replace