Dell PowerEdge T30 Owner's Manual

NOTE: The diagnostic indicators are not present if the system is equipped with an LCD display.

NOTE: No diagnostic indicators are lit when the system is turned off. To start the system, plug it into a working power source and press the power button.

Table 1. Diagnostic indicators on the front panel Item 1is the health indicator, that indicates the health status of the system. The indicator turns solid blue if the system is turned on and in good health. Item 2 is Hard-drive indicator, that The indicator flashes amber and white if there is a PSU failure.

Icon	Description	Condition	Corrective action
	Hard-drive indicator	The indicator flashes amber if there is a hard-drive error.	Check the hard drive. If the problem persists, see the Troubleshooting hard drive section or the Getting help section.
	Power-on indicator	The indicator flashes amber and white if there is a component failure.	This is due to component failure in the system. For more information, see the Power on LED indicator codes section. If the problem persists, see the appropriate Troubleshooting section or the Getting help section.