Dell EMC OpenManage Enterprise Version 3.0 User's Guide

In the Select Firmware Source tab, you can select the required baseline or individual update package to update the firmware.

Baseline

Select this option to update the baseline version of the firmware which you want to update. Select the required baseline version from the drop-down.

COMPLIANCE

Indicates the significance of the firmware update, based on the compliance status of the individual component. The possible options are:

• OK—The current firmware version of the device or component matches the baseline defined in the catalog file.
• Critical—The current firmware version of the component or device is older than the baseline defined in the catalog file. The update is essential for the proper functioning of the device or component.
• Downgrade—The current firmware version of the component or device is newer than the baseline defined in the catalog file.
• Warning—The current firmware version of the component or device is older than the baseline defined in the catalog file. The update is an enhancement of the device or component.

MODEL

Displays the model of the device.

SERVICE TAG

Displays the service tag of the device for which the firmware is updated.

DEVICE NAME / COMPONENTS

Displays the name of the device or component.

REBOOT REQUIRED

Indicates if the system must be restarted after the firmware is installed.

PREREQUISITES

Displays the prerequisites for the firmware update.

IMPACT ASSESSMENT

Displays a message about the impact of the firmware update.

CURRENT VERSION

Displays the version of the firmware installed.

BASELINE VERSION

Displays the baseline of the firmware stored in the baseline.

Individual package

Select this option to update the firmware from a catalog. Click Browse to navigate to the location where the catalog file is located.

Actions

Next

Displays the Schedule tab.

Cancel

Closes the wizard without saving the changes.