Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell OpenManage Server Administrator Version 8.5 Command Line Interface Guide

PDF

Omconfig system pedestinations or omconfig servermodule pedestinations

Use the omconfig system pedestinations or omconfig servermodule pedestinations command to set IP addresses for alert destinations.

The following table displays the valid parameters for the command.

  • NOTE: You can either specify the index and IP address as parameters together or you can set only the community string as a parameter.
  • NOTE: Index 1 to 4 accepts an IPv4 address and index 5 to 8 accepts an IPv6 address. On 12th generation of PowerEdge systems with iDRAC7 specific versions, the index can accept IPv4, IPv6, or FQDN.
Table 1. Valid Parameters Of Omconfig System Pedestinations Or Omconfig Servermodule Pedestinations . The following table describes
  • destenable=true or false — true: Enables an individual platform event filter destination after a valid IP address has been set. false: Disables an individual platform event filter.
  • index=number — Sets the index for the destination.
  • ipaddress — Sets the IP address for the destination. On 12th generation systems with iDRAC7 specific versions, ipaddress can also be a Fully Qualified Domain Name or FQDN.
  • communitystr=text — Sets the text string that acts as a password and is used to authenticate SNMP messages sent between the BMC and the destination management station.
name=Value Pair Description
destenable=true | false

true: Enables an individual platform event filter destination after a valid IP address has been set.

false: Disables an individual platform event filter.

index=number Sets the index for the destination.
ipaddress=< ipv4 address | ipv6 address | fqdn>

Sets the IP address for the destination.

  • NOTE: On 12th generation of PowerEdge systems with iDRAC7 specific versions, ipaddress can also be a Fully Qualified Domain Name (FQDN).
communitystr=text Sets the text string that acts as a password and is used to authenticate SNMP messages sent between the BMC and the destination management station.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\