Dell EMC OpenManage SNMP Reference Guide Version 9.1

PDF

Array Disk Table

This table describes available properties for each physical array disk on the managed system.

The following object sets up the Array Disk Table.

Table 1. Array Disk Table. The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskTable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4
Description	Defines the array disk table.
Syntax	SEQUENCE OF ArrayDiskEntry
Access	Not accessible

Table 2. Array Disk Entry. The following table describes the name, object ID, description, syntax, access level, and index.
Name	`arrayDiskEntry`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1
Description	Defines the array disk table entry.
Syntax	ArrayDiskEntry
Access	Not accessible
Index	`arrayDiskNumber`

Table 3. Array Disk Number. The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.1
Description	Identifies the instance number of the array disk entry.
Syntax	Integer
Access	Read-only

Table 4. Array Disk Name. The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskName`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.2
Description	Identifies the name of the array disk as represented in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 5. Array Disk Vendor. The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskVendor`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.3
Description	The array disk's manufacturer's name.
Syntax	DisplayString
Access	Read-only

Table 6. Array Disk State. The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.4
Description	Identifies the current state of the array disk. Possible states: 0: Unknown 1: Ready - Available for use, but no RAID configuration has been assigned. 2: Failed - Not operational. 3: Online - Operational. RAID configuration has been assigned. 4: Offline - The drive is not available to the RAID controller. 6: Degraded - Refers to a fault-tolerant array/virtual disk that has a failed disk. 7: Recovering - Refers to state of recovering from bad blocks on disks. 11: Removed - Indicates that array disk has been removed. 13: Non-RAID - Indicates that array disk is not a RAID capable disk. 14: Not Ready - Applicable for PCIeSSD devices indicating that the device is in locked state. 15: Resynching - Indicates one of the following types of disk operations: Transform Type, Reconfiguration, and Check Consistency. 22: Replacing - Indicates copyback operation is in progress. 24: Rebuild 25: No Media - CD-ROM or removable disk has no media. 26: Formatting - In the process of formatting. 28: Diagnostics - Diagnostics are running. 34: Predictive Failure 35: Initializing: Applies only to virtual disks on PERC, PERC 2/SC, and PERC 2/DC controllers. 39: Foreign 40: Clear 41: Unsupported 53: Incompatible 56: Read Only - Applicable for PCIeSSD devices. Indicates that device has reached read-only state.
Syntax	Integer
Access	Read-only

Table 7. Array Disk Severity. The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskSeverity`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.5
Description	This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Syntax	Integer
Access	Read-only

Table 8. Array Disk Product ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskProductID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.6
Description	Identifies the model number of the array disk.
Syntax	DisplayString
Access	Read-only

Table 9. Array Disk Serial Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskSerialNo`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.7
Description	Identifies the array disk's unique identification number from the manufacturer.
Syntax	DisplayString
Access	Read-only

Table 10. Array Disk Revision. The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskRevision`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.8
Description	Identifies the firmware version of the array disk.
Syntax	DisplayString
Access	Read-only

Table 11. Array Disk Enclosure ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskEnclosureID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.9
Description	Identifies the SCSI ID of the enclosure processor to which this array disk belongs.
Syntax	DisplayString
Access	Read-only

Table 12. Array Disk Channel. The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskChannel`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.10
Description	Identifies the bus to which this array disk is connected.
Syntax	Integer
Access	Read-only

Table 13. Array Disk Length in Megabytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskLengthInMB`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.11
Description	Identifies the size in megabytes of the array disk. If this size is 0, it is smaller than a megabyte.
Syntax	Integer
Access	Read-only

Table 14. Array Disk Length in Bytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskLengthInBytes`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.12
Description	Identifies the size of the array disk in bytes that is less than a megabyte. This size plus the arrayDiskLengthInMB is the total size of the array disk.
Syntax	Integer
Access	Read-only

Table 15. Array Disk Largest Contiguous Free Space in Megabytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskLargestContiguousFreeSpaceInMB`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.13
Description	The size in megabytes of the largest contiguous free space on the array disk. If this size is 0, it is less than a megabyte.
Syntax	Integer
Access	Read-only

Table 16. Array Disk Largest Contiguous Free Space in Bytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskLargestContiguousFreeSpaceInBytes`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.14
Description	The size of the largest contiguous free space on this array disk in bytes that is less than a megabyte. This size plus the arrayDiskLargestContiguousFreeSpaceInMB is the total size of the largest contiguous free space on the array disk.
Syntax	Integer
Access	Read-only

Table 17. Array Disk Target ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskTargetID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.15
Description	Identifies the SCSI target ID which this array disk is assigned.
Syntax	Integer
Access	Read-only

Table 18. Array Disk LUN ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskLunID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.16
Description	Identifies the array disk's logical unit number.
Syntax	Integer
Access	Read-only

Table 19. Array Disk Used Space in Megabytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskUsedSpaceInMB`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.17
Description	Identifies the amount in megabytes of the used space on the array disk. If this size is 0, it is smaller than a megabyte.
Syntax	Integer
Access	Read-only

Table 20. Array Disk Used Space in Bytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskUsedSpaceInBytes`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.18
Description	Identifies the size in bytes of the used space on the array disk that is smaller than a megabyte. This size plus the arrayDiskUsedSpaceInMB is the total amount of used space on the array disk.
Syntax	Integer
Access	Read-only

Table 21. Array Disk Free Space in Megabytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskFreeSpaceInMB`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.19
Description	Identifies the amount in megabytes of the free space on the array disk. If this size is 0, it is smaller than a megabyte.
Syntax	Integer
Access	Read-only

Table 22. Array Disk Free Space in Bytes . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskFreeSpaceInBytes`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.20
Description	Identifies the size in bytes of the free space on the array disk that is smaller than a megabyte. This size plus the arrayDiskFreeSpaceInMB is the total amount of free space on the array disk.
Syntax	Integer
Access	Read-only

Table 23. Array Disk Bus Type . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskBusType`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.21
Description	Identifies the bus type of the array disk. Possible values: 1: SCSI 2: IDE 3: Fibre Channel 4: SSA 6: USB 7: SATA 8: SAS 9: PCIe
Syntax	Integer
Access	Read-only

Table 24. Array Disk Spare State . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskSpareState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.22
Description	Identifies the status of the array disk as a spare. Possible states: 1: Disk is a member of a virtual disk 2: Disk is a member of a disk group 3: Disk is a global hot spare 4: Disk is a dedicated hot spare 5: Not a spare 99: Not applicable
Syntax	Integer
Access	Read-only

Table 25. Array Disk Roll-Up Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskRollUpStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.23
Description	Severity of the array disk state. This is the combined status of the array disk and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 26. Array Disk Component Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskComponentStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.24
Description	The status of the array disk itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 27. Array Disk Device Name . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskDeviceName`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.25
Description	Identifies the operating system device name for this disk.
Syntax	DisplayString
Access	Read-only

Table 28. Array Disk Nexus ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskNexusID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.26
Description	Indicates the durable unique ID for this array disk.
Syntax	DisplayString
Access	Read-only

Table 29. Array Disk Part Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskPartNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.27
Description	Indicates the part number of the disk.
Syntax	DisplayString
Access	Read-only

Table 30. Array Disk SAS Address . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskSASAddress`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.28
Description	Indicates the specified SAS address if this is a SAS disk.
Syntax	DisplayString
Access	Read-only

Table 31. Array Disk Negotiated Speed . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskNegotiatedSpeed`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.29
Description	Indicates the speed at which the drive is actually running in MPS (megabytes per second).
Syntax	Integer
Access	Read-only

Table 32. Array Disk Capable Speed . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskCapableSpeed`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.30
Description	Indicates the maximum speed at which the drive is capable of negotiating in MPS (megabytes per second).
Syntax	Integer
Access	Read-only

Table 33. Array Disk Smart Alert Indication . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskSmartAlertIndication`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.31
Description	Indicates whether the disk has received a predictive failure. Possible values: 1: No - disk has not received a predictive failure alert 2: Yes - disk has received a predictive failure alert
Syntax	Integer
Access	Read-only

Table 34. Array Disk Manufacture Day . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskManufactureDay`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.32
Description	Indicates the day of the week (1=Sunday through 7=Saturday) on which this disk was manufactured.
Syntax	DisplayString
Access	Read-only

Table 35. Array Disk Manufacture Week . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskManufactureWeek`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.33
Description	Indicates the week (1 through 53) in which this disk was manufactured.
Syntax	DisplayString
Access	Read-only

Table 36. Array Disk Manufacture Year . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskManufactureYear`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.34
Description	Indicates the four-digit year in which this disk was manufactured.
Syntax	DisplayString
Access	Read-only

Table 37. Array Disk Media Type . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskMediaType`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.35
Description	The Media type of the array disk. Possible Values: 1:unknown 2:hdd 3:ssd
Syntax	INTEGER
Access	Read-only

Table 38. Array Disk Dell Certified . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskDellCertified`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.36
Description	Indicates if array disk is certified by Dell. Value: 1 - Certified, 0 - Not Certified, 99 - Unknown
Syntax	Integer
Access	Read-only

Table 39. Array Disk Alta Vendor Id . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskAltaVendorId`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.37
Description	Provides vendor information for Alta interposer.
Syntax	Octet String
Access	Read-only

Table 40. Array Disk Alta Product Id . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskAltaProductId`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.38
Description	Provides product ID for Alta interposer.
Syntax	Octet String
Access	Read-only

Table 41. Array Disk Alta Revision Id . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskAltaRevisionId`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.39
Description	Provides revision ID for Alta interposer.
Syntax	Octet String
Access	Read-only

Table 42. Array Disk Encryption Capable . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskEncryptionCapable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.40
Description	Indicates if physical disk is encryption capable. Value: 1 - Capable, 0 - Not Capable, 99 - Not Applicable
Syntax	Integer
Access	Read-only

Table 43. Array Disk Encrypted. The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskEncrypted`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.41
Description	Indicates if the physical disk has encryption enabled. Value: 1 - Yes, 0 - No, 99 - Not Applicable
Syntax	Integer
Access	Read-only

Table 44. Array Disk Power State . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskPowerState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.42
Description	Indicates power state of a physical drive. Value: 0 - Spun up, 1- Spun down, 255 - Transition, 99 - Not Applicable
Syntax	Integer
Access	Read-only

Table 45. Array Disk Drive Write Cache . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskDriveWriteCache`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.43
Description	Indicates drive write cache capability for PCIe SSD devices. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined/NotApplicable
Syntax	Integer
Access	Read-only

Table 46. Array Disk Model Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskModelNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.44
Description	Provides PCIe SSD device model number.
Syntax	DisplayString
Access	Read-only

Table 47. Array Disk Life Remaining . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskLifeRemaining`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.45
Description	Provides PCIe SSD device life remaining in percentage. Value: 0..100, 999 - Undetermined/Not Applicable
Syntax	INTEGER
Access	Read-only

Table 48. Array Disk Driver Version . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskDriverVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.46
Description	Provides PCIe SSD device driver version.
Syntax	INTEGER
Access	Read-only

Table 49. Array Disk Device Life Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskDeviceLifeStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.47
Description	Provides PCIe SSD device life status. Possible Values: -1: Not Available / Not Applicable 1: Drive Health Good 2: Approaching Warranty Coverage Expiry 3: Warranty Coverage Expired 4: Approaching Read Only 5: Read Only
Syntax	INTEGER
Access	Read-only

Table 50. Array Disk Read Only . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskReadOnly`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.48
Description	Provides the read only attribute for PCIe SSD. Possible Values: Yes, No, Not Applicable
Syntax	DisplayString
Access	Read-only

Table 51. Array Disk Remaining Rated Write Endurance . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskRemainingRatedWriteEndurance`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.49
Description	Provides the remaining rated write endurance for SAS/SATA SSD device. Possible Values: 0-100% : Not Available / Not Applicable
Syntax	DisplayString
Access	Read-only

Table 52. Array Disk Sector Size . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskSectorSize`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.50
Description	Provides the information regarding sector size of the array disk. Possible Values: 512 or 4096
Syntax	INTEGER
Access	Read-only

Table 53. Array Disk PI Capable . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskPICapable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.51
Description	Provides the information regarding T10 PI capability of array disk. Possible Values: 0 : T10 PI incapable or 1 : T10 PI capable
Syntax	INTEGER
Access	Read-only

Table 54. Array Disk Max Link Width . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskMaxLinkWidth`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.52
Description	Provides the information regarding Max Link Width of array disk. Possible Values: 0 – 8
Syntax	INTEGER
Access	Read-only

Table 55. Array Disk Negotiated Link Width . The following table describes the name, object ID, description, syntax, and access level.
Name	`arrayDiskNegotiatedLinkWidth`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.53
Description	Provides the information regarding Negotiated Link Width of array disk. Possible Values: 0 – 8
Syntax	INTEGER
Access	Read-only

Table 56. Non-RAID Disk Cache Policy . The following table describes the name, object ID, description, syntax, and access level.
Name	`nonRAIDdiskCachePolicy`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.54
Description	Displays the current disk write cache policy of the Non-RAID disk. Possible Values: Enabled - Disabled
Syntax	DisplayString
Access	Read-only

Table 57. Array Disk Cache Policy . The following table describes the name, object ID, description, syntax, and access level.
Name	`arraydiskCachePolicy`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.55
Description	Displays the current disk write cache policy of the array disk. Possible Values: Enabled - Disabled - Default
Syntax	DisplayString
Access	Read-only

Table 58. Array Disk ISE Capable . The following table describes the name, object ID, description, syntax, and access level.
Name	`arraydiskISECapable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.4.1.56
Description	A boolean value decepting if the disk is Instant Secure Erase Capable or not.
Syntax	INTEGER
Access	Read-only