Dell EMC OpenManage SNMP Reference Guide Version 9.1

PDF

Temperature Probe Table

This table describes available properties for each temperature probe on the managed system.

The following object sets up the Temperature Probe Table.

Table 1. Temperature Probe Table . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeTable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11
Description	A table of managed temperature probes. The number of entries is related to the number of temperature probes discovered in the system. The maximum number of entries is implementation dependent. NOTE: The properties in this table may not be applicable to all entries.
Syntax	SEQUENCE OF TemperatureProbeEntry
Access	Not accessible

Table 2. Temperature Probe Entry . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeEntry`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1
Description	An entry in the Temperature Probe Table. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Syntax	TemperatureProbeEntry
Access	Not accessible
Index	`TemperatureProbeNumber`

Table 3. Temperature Probe Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.1
Description	Identifies the instance number of the temperature probe entry.
Syntax	Integer
Access	Read-only

Table 4. Temperature Probe Name . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeName`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.2
Description	Identifies the temperature probe's name as represented in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 5. Temperature Probe Vendor . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeVendor`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.3
Description	Identifies the temperature probe's (re)seller's name.
Syntax	DisplayString
Access	Read-only

Table 6. Temperature Probe State . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.4
Description	Identifies the current state of the temperature probe. Possible states: 0: Unknown 1: Ready 2: Failed (Minimum Failure Threshold Exceeded, Maximum Failure Threshold Exceeded) 4: Offline 6: Degraded (Minimum Warning Threshold Exceeded, Maximum Warning Threshold Exceeded) 9: Inactive 21: Missing
Syntax	Integer
Access	Read-only

Table 7. Temperature Probe Severity . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeSeverity`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.5
Description	This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Syntax	Integer
Access	Read-only

Table 8. Temperature Probe Unit . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeUnit`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.6
Description	The units that are used to display temperatures for the temperature probe.
Syntax	DisplayString
Access	Read-only

Table 9. Temperature Probe Minimum Warning . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeMinWarning`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.7
Description	Identifies the minimum temperature that forces the probe into a warning state.
Syntax	Integer
Access	Read-only

Table 10. Temperature Probe Minimum Critical . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeMinCritical`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.8
Description	Identifies the minimum temperature that forces the probe into an error state.
Syntax	Integer
Access	Read-only

Table 11. Temperature Probe Maximum Warning . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeMaxWarning`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.9
Description	Identifies the maximum temperature that forces the probe into a warning state.
Syntax	Integer
Access	Read-only

Table 12. Temperature Probe Maximum Critical . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeMaxCritical`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.10
Description	Identifies the maximum temperature that forces the probe into an error state.
Syntax	Integer
Access	Read-only

Table 13. Temperature Probe Current Value . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeCurValue`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.11
Description	Identifies the current temperature of this probe.
Syntax	Integer
Access	Read-only

Table 14. Temperature Probe Roll-Up Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeRollUpStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.12
Description	Severity of the temperature probe state. This is the combined status of the temperature probe and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 15. Temperature Probe Component Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeComponentStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.13
Description	The status of the temperature probe itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 16. Temperature Probe Nexus ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`temperatureProbeNexusID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.11.1.14
Description	Durable unique ID for this temperature probe.
Syntax	DisplayString
Access	Read-only