Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude E7250 Owner's Manual

Removing the Display Assembly

  1. Follow the procedures in Before Working Inside Your Computer .
  2. Remove:
    1. battery

    2. base cover

    3. keyboard trim

    4. keyboard

    5. SSD card

    6. palmrest

  3. Disconnect the power-connector port cable from its connector on the system board.. Figure displaying removal of eDP cable from the computer.
  4. Perform the following steps as shown in the illustration:
    1. Disconnect the WWAN and WLAN cables from their connectors on the WWAN and WLAN cards [1].
    2. Release the WWAN and WLAN cables from their routing channels [2].
    Figure displaying disconnecting the WWAN and WLAN cable from the computer.
  5. Perform the following steps as shown in the illustration:
    1. Remove the screw that secures the display cable to the computer [1].
    2. Lift the tab to access the display cable [2].
    3. Disconnect the display cable from its connector on the system board [3].
    Figure displaying removing the display cable from the computer.
  6. Perform the following steps as shown in the illustration:
    1. Pull the antenna cables from the holes on the base chassis that secure the display assembly to the computer [1] [2].
    Figure displaying removal of cables.
  7. Perform the following steps as shown in the illustration:
    1. Remove the screws that secure the display assembly to the computer [1].
    2. Lift the display assembly to remove the computer [2].
    Figure displaying removal of display assembly from the computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\