The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. The following table describes iDRAC Direct activity when the iDRAC Direct port is active:
|iDRAC Direct LED indicator code||Condition|
|Solid green for two seconds||Indicates that the laptop or tablet is connected.|
|Flashing green (on for two seconds and off for two seconds)||Indicates that the laptop or tablet connected is recognized.|
|Turns off||Indicates that the laptop or tablet is unplugged.|