CAUTION: To prevent data loss and potential damage to your system,
ensure that your system, LEDs on system, LEDs on NVDIMM-N and LEDs
on NVDIMM-N battery are turned off before removing the NVDIMM-N battery.
WARNING: Allow the memory modules to cool after you power off the system.
Handle the memory modules by the card edges and avoid touching the
components or metallic contacts on the memory module.
CAUTION: To ensure proper system cooling, memory module blanks
must be installed in any memory socket that is not occupied. Remove
memory module blanks only if you intend to install memory modules
in those sockets.
Locate the appropriate memory module socket.
CAUTION: Handle each memory
module only by the card edges, ensuring not to touch the middle of
the memory module or metallic contacts.
Push the ejectors
outward on both ends of the memory module socket to release the memory
module from the socket.
Lift and remove the memory module from the system.