This chapter contains the deployment architecture details
for Wyse Management Suite.
The Wyse Management Suite supports up to 1,20,000 connected
You can also customize your deployment for 50,000 devices
or more, depending on the deployment setup.
hardware requirement on a single server for 50,000 devices is:
16 GB RAM
40 GB HDD
The following diagram explains deployment of
Wyse Management Suite on a single server:
hardware requirement on a single server for 1,20,000 devices is:
32 GB RAM
200 GB HDD
Four network interfaces (to assign 4 IP addresses to the server)
You can deploy FE MQTT on a separate
server. This reduces the load on the WMS server because the TCP connections
to be supported is shared between the FE MQTT server and the WMS server.
The minimum hardware requirements are:
1 network interface
8 GB RAM
80 GB HDD
The following diagram depicts the architecture
of FE MQTT Servers separated from Wyse Management Suite server.
This section explains the deployment architecture of Wyse Management
Suite on a separate database server. MongoDB and MariaDB may be on
the same server or on separate servers.
diagram depicts the deployment architecture of Wyse Management Suite
on a separate database server.