Use the System Personalization page to configure the system personalization.
Table 1. Configuring
display settingsDisplay
Option
Description
Monitor Resolution—Primary
Select this option to set the
monitor resolution. From the drop-down menu, select your preferred
monitor resolution.
Monitor Rotation
Select this option to define the orientation of
the monitor. From the drop-down list, select either vertical or horizontal
based on your preference.
NOTE: The horizontal and
vertical (Rotate to right) options are only available for Wyse Management
Suite server UI.
Enable Dual Monitor
Select this option to enable the
dual monitor functionality. If you select this check box, the following
options are displayed:
Display Mode—Use this option to set the Display mode.
Monitor Resolution (Secondary)—From the drop-down
menu, select your preferred monitor resolution.
Span Position—Display is spanned. From the drop-down
menu, select any one of the following options:
On Left
On Right
Bottom
Top
Enable Multi Monitor
Select this option to enable multi-monitor settings.
Monitor Resolution (Third)
From the drop-down list, select the monitor resolution
for the third monitor.
NOTE:
Windows Embedded Standard multi-monitor—No limitations.
ThinLinux multi-monitor— Dell Wyse 5070 extended
thin client supports multi-monitor functionality when more than four
monitors are connected.
Span Position
Display is spanned. From the drop-down, select
one of the options:
Right
Left
Bottom
Top
Select number of monitors to be Supported.
From the drop-down list, select the number of monitors
to be supported.
NOTE: If you select more than three monitors, then the monitor resolution
setting and monitor rotation setting is common for all the monitors.
Dell Wyse 5070 extended thin client supports multi-monitor functionality
when more than four monitors are connected.
Table 2. Configuring
keyboard settingsKeyboard
Option
Description
Layout
Select this option to set the
keyboard layout of the thin client. From the drop-down menu, select
your preferred option.
Table 3. Configuring
language settingsLanguage
Option
Description
System Language
Select this option to set the language
for the system. From the drop-down list, select your preferred option.
Table 4. Configuring
mouse settingsMouse
Option
Description
Mouse Speed
Select this option to specify
the speed of the mouse pointer when moving the mouse. The range of
mouse speed is 0–6.
Left-handed Mouse
Select this option to swap the
mouse button between left-click and right-click.
Table 5. Configuring
time zone settingsTime Zone
Option
Description
Time Zone
Select this option to set the time zone based
on your location. From the drop-down menu, select your preferred time
zone.
Time Format
Select this option to select the time format.
From the drop-down menu, set the time format to either 12–hour or
24-hour format.
Time Servers (NTP Servers)
Select this option to list the
time servers. Time severs allow the NTP server to synchronize the
time. Multiple servers are allowed, and the server names must be separated
by commas.
Table 6. Configuring
audio settingsAudio
Option
Description
Audio Volume
Select this option to set the audio
volume of the thin client. The range of the audio volume is 0–100.
Audio Mute
Select this option to set the
thin client to mute mode.
Microphone Volume
Select this option to set the microphone
volume of the thin client. The range of the microphone volume is 0–100.
Microphone Mute
Select this option to set the
microphone to mute mode.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\