Aurora R7 Setup and Specifications

Set up your computer

1. Connect the keyboard and mouse.
   

   NOTE: For setup instructions, see the documentation shipped with the keyboard and mouse.
2. Connect the network cable — optional.
   
3. Connect the display.
   

   NOTE: The DisplayPort on the back panel of your computer is covered. Connect the display to the discrete graphics card of your computer.

   NOTE: If you have two graphics cards, the card installed in PCI-Express X16 (graphics slot 1) is the primary graphics card.

   NOTE: For more information about setting up multiple monitors, see the knowledge base article SLN129825 at https://www.dell.com/support.
4. Connect the power cable.
   
5. Press the power button.