Click the Temperatures object to manage
your system temperature in order to prevent thermal damage to your
system’s internal components. Server Administrator monitors the temperature
in a variety of locations in your system's chassis to ensure that
temperatures inside the chassis do not become too high.
The Temperatures object action window displays
the following tabs, depending on the user's group privileges: Properties and Alert Management.
Subtab: Temperature Probes
Under the Properties tab, you can view the current readings
and status of your system's temperature probes and configure minimum
and maximum values for temperature probe warning threshold.
NOTE: Some temperature
probe fields differ according to the type of firmware your system
has such as BMC or ESM. Some threshold values are not editable on
BMC-based systems. When assigning probe threshold values, Server Administrator
sometimes rounds the minimum or maximum values you enter to the closest
assignable value.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
View the current alert actions settings and set the alert actions
that you want to be performed in the event that a temperature probe
returns a warning or failure value.
View the current SNMP trap alert thresholds and set the alert
threshold levels for temperature probes. The selected traps are triggered
if the system generates a corresponding event at the selected severity
level.
NOTE: You can set minimum
and maximum temperature probe threshold values for an external chassis
to whole numbers only. If you attempt to set either the minimum or
maximum temperature probe threshold value to a number that contains
a decimal, only the whole number before the decimal place is saved
as the threshold setting.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\