Dell EMC OpenManage Command Line Interface Guide Version 9.1

PDF

Omreport System Events Type Or Omreport Servermodule Events Type

To view the status for components of a specific type, use the omreport system events type=<component name> or omreport servermodule event type=<component name> command. Type:

omreport system events type=fans

or

omreport servermodule events type=fans

This command displays a summary of each component in the system for which events are generated.

The following table displays the events displayed for various component types.

Table 1. Valid Parameters Of Omreport System Events Type Or Omreport Servermodule Events Type . This table lists the Valid Parameters Of Omreport System Events Type Or Omreport Servermodule Events Type
name=value pair	Description
type=accords	Reports events for AC power cords
type=battery	Reports events for batteries
type=fanenclosures	Reports events for fan enclosures
type=fans	Reports events for fans
type=intrusion	Reports events for chassis intrusion
type=log	Reports events for logs
type=memory	Reports events for memory
type=powersupplies	Reports events for power supplies
type=redundancy	Reports events for redundancy
type=systempower	Reports events for system power
type=temps	Reports events for temperatures
type=removableflashmedia	Reports events for removable flash media
type=volts	Reports events for voltages

The following is an example output:

Current SNMP Trap Configuration 
                                 -------
                                 System
                                 -------
                                 Settings
                                 Enable: Informational, Warning, and Critical
                                 Disable: None
                                 -----------
                                 Fans Group
                                 ----------
                                 Settings
                                 Enable: Informational, Warning, and Critical
                                 Disable: None
                                 -----------
                                 Individual Objects
                                 -----------
                                 System Board Fan1 RPM Settings
                                 Index:0
                                 Enable: Informational, Warning, and Critical
                                 Disable: None
                                 System Board Fan2 RPM Settings
                                 Index:1
                                 Enable: Informational, Warning, and Critical
                                 Disable: None