Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Inspiron 13 7000 2-in-1 Service Manual

Procedure

  • CAUTION: To avoid damage to the wireless card, do not place any cables under it.
  1. Align the notch on the wireless card with the tab on the wireless-card slot.
  2. Insert the wireless card at an angle into the wireless-card slot.
  3. Connect the antenna cables to the wireless card.

    The following table provides the antenna-cable color scheme for the wireless card supported by your computer.

    Connectors on the wireless cardAntenna-cable color
    Main (white triangle)White
    Auxiliary (black triangle)Black
  4. Align the screw hole on the wireless card bracket with the screw hole on the wireless card.
  5. Replace the screw that secures the wireless card bracket to the wireless card.
    Image: Replacing the wireless card
    1. tab
    2. notch
    3. wireless-card slot
    4. wireless card
    5. antenna cables (2)
    6. wireless card bracket
    7. screw

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\