Dell EMC OpenManage Essentials Version 2.5 User's Guide

SNMP V3 Configuration

The following table describes the fields displayed in the SNMP V3 Configuration.

Table 1. SNMP V3 Configuration. The following table describes the fields displayed in the SNMP V3 Configuration.
Field	Description
Agent IP Address	Provide the SNMP agent IP address.
Engine ID	Provide the unique engine ID of the SNMP agent.
Username	Provide the user name required to execute the task on the device.
Authentication Protocol	Select the authentication protocol for the discovery of the devices. The available options are MD5, SHA1, and none. The device must be configured using the same authentication protocol for the discovery to be successful. If the authentication protocol is selected to be none, then the encryption option is also disabled.
Authentication Password	Provide the authentication password.
Encryption Protocol	Select the encryption protocol for the discovery of the devices. The available options are AES, DES, and none. The device must be configured using the same encryption protocol for the discovery to be successful.
Encryption Password	Provide the encryption password.
Refresh	Click to refresh the SNMP V3 Configuration page to display the added SNMP V3 traps.
Add New	Click to configure the SNMP V3 traps manually.
Import	Click to import the .csv file containing the SNMP V3 trap credentials.
Export	Click to export the SNMP V3 trap credentials to a .csv file.
Save	Click to save the SNMP V3 traps after importing the credentials from a .csv file or by providing the credentials manually.
Delete	Click to delete the selected SNMP V3 traps from the list.