Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge C6320 Owner's Manual

Front panel features and indicators

Figure 1. Front panel − 3.5-inch x12 hard drives with four system boards (C6320 RAID card and onboard SATA controller)
This image shows the front panel of the 3.5-inch x12 hard drives configuration with four system boards.
Figure 2. Front panel − 2.5-inch x24 hard drives with four system boards (C6320 RAID card and onboard SATA controller)
This image shows the Front panel − 2.5-inch x24 hard drives with four system boards.
NOTE: For more information about the direction details of the 2.5-inch hard drive expander configuration support, see the HDD Zoning configuration tool at Dell.com/support.
Table 1. Front panel features and indicatorsThis table describes about front panel features and indicators.

Item

Indicator, button or connector

Icon

Description

1

Power-on indicator or system state indicator or power button for system board 1

This image shows the power-on indicator/system state indicator/power button for system boards 1, 2, 3, and 4.

The power-on indicator turns to green when the system power is on.

The power-on indicator turns to amber when the system critical event occurs.

The power button controls the DC power supply output to the system.

NOTE: When turning on the system, the video monitor can take from several seconds to over two minutes to display an image, depending on the number and capacity of DIMMs installed in the system.
NOTE: On ACPI-compliant operating systems (OSs), turning off the system by using the power button causes the system to perform a graceful shutdown before power to the system is turned off.
NOTE: To force an ungraceful shutdown, press and hold the power button for 5 seconds.
3

Power-on indicator or system state indicator or power button for system board 2

7

Power-on indicator or system state indicator or power button for system board 4

9

Power-on indicator or system state indicator or power button for system board 3

2 System identification indicator or button for system board 1 This image shows the system identification indicator or button for system boards 1, 2, 4, and 3.The identification button can be used to locate a particular system and system board within a chassis. When the button is pushed, the blue status indicator of the system on the front and rear blinks until the button is pushed again.
4 System identification indicator or button for system board 2
6 System identification indicator or button for system board 4
8 System identification indicator or button for system board 3
5 Hard drives

Up to 12 hot swappable 3.5-inch hard drives.

Up to 24 hot swappable 2.5-inch hard drives.

* Drive cover Applicable only for 2.5-inch hard drive systems. This is not a usable drive slot.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\