- Notes, cautions, and warnings
- Dell PowerEdge C6320 product overview
- Supported configurations for PowerEdge C6320 system
- Accessing system features during startup
- Front panel features and indicators
- Hard drive indicator patterns
- Back panel features and indicators
- LAN indicator codes
- Power and system board indicator codes
- Power Supply Unit indicator codes
- Baseboard Management Controller (BMC) heart beat LED
- System configuration limitations by Intel Xeon processor E5-2600 v3 and E5-2600 v4 product family
- Locating your system Service Tag
- Documentation resources
- Technical specifications
- Initial system setup and configuration
- Pre-operating system management applications
- Options to manage the pre-operating system applications
- System Setup
- Viewing System Setup
- System Setup details
- System BIOS
- iDRAC Settings utility
- Device Settings
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- System cover
- Inside the system
- Cooling fans
- Hard drives
- Removing a 3.5-inch hard drive blank
- Installing a 3.5-inch hard drive blank
- Removing a 2.5-inch hard drive blank
- Installing the 2.5-inch hard drive blank
- Removing a hard drive carrier
- Installing a hard drive carrier
- Removing a hard drive from a hard drive carrier
- Installing a hard drive into a hard drive carrier
- Installing a 2.5-inch SSD into a 3.5-inch hard drive carrier
- SSD and SSD holder
- SATADOM
- Power supply units
- System board tray
- System board assembly
- Cooling shroud
- Heat sinks
- Processors
- Expansion card assembly and expansion card
- PCI-E slot priority
- PERC cards
- Riser card
- Optional mezzanine cards
- Mezzanine card bridge board
- System memory
- System battery
- System board
- Trusted Platform Module
- Power distribution boards
- Midplanes
- Hard drive backplanes
- 2.5-inch hard drive expander configuration
- Control panel
- Sensor board
- Removing the sensor board for 3.5-inch hard drive system
- Installing the sensor board for 3.5-inch hard drive system
- Cable routing for sensor board and control panel for 3.5-inch hard drive system
- Removing the sensor board for 2.5-inch hard drive system
- Installing the sensor board for 2.5-inch hard drive system
- Cable routing for sensor board and control panel for 2.5-inch hard drive system
- Jumpers and connectors
- Troubleshooting your system
- Installation Problems
- Minimum configuration to POST
- Troubleshooting system startup failure
- Troubleshooting external connections
- Troubleshooting the video subsystem
- Troubleshooting a USB device
- Troubleshooting a serial input and output device
- Troubleshooting a NIC
- Troubleshooting a wet system
- Troubleshooting a damaged system
- Troubleshooting the system battery
- Troubleshooting power supply units
- Troubleshooting cooling problems
- Troubleshooting cooling fans
- Troubleshooting system memory
- Troubleshooting a drive or SSD
- Troubleshooting a storage controller
- Troubleshooting expansion cards
- Troubleshooting processors
- Getting help
Dell PowerEdge C6320 Owner's Manual
Power distribution boards
The power distribution board (PDB) is a board that connects the redundant power supply units to the system board. The Fan Control Board is a part of the PDB1. A PDB is only available in systems that support redundant power supply units. This system has two PDBs. The procedure to remove and install both the PDBs is similar. Remove PDB 1, to access PDB 2.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\