Dell DL1000 Appliance Owner's Manual

PDF

Back-panel features and indicators

Figure 1. Back-panel features and indicators The figure shows back panel features and indicators.

Item	Indicator, Button, or Connector	Description
1	Serial connector	Allows you to connect a serial device to the system.
2	Dell PERC H310 slot	Accommodates the Dell PERC H310 card.
3	Video connector	Allows you to connect a VGA display to the system.
4	eSATA	Allows you to connect to an external storage device for replication seeding. NOTE: Do not connect a storage repository to the eSATA connector.
5	USB connectors (2)	Allow you to connect USB devices to the system. The ports are USB 3.0-compliant.
6	Ethernet connectors (2)	Two integrated 10/100/1000 Mbps NIC connectors.
7	System status indicator	Indicates the status of the system. Lights blue during normal system operation. Lights amber when the system needs attention due to a problem.
8	System identification button	The identification buttons on the front and back panels can be used to locate a particular system within a rack. When one of these buttons is pressed, the system status indicator on the back flashes until one of the buttons is pressed again. Press to toggle the system ID on and off. If the system stops responding during POST, press and hold the system ID button for more than five seconds to enter BIOS progress mode. To reset iDRAC (if not disabled in the iDRAC Settings option) press and hold the button for more than 15 seconds.
9	Power supply	250 W AC power supply.
10	Retention clip	Secures the power cable.