CAUTION: Switching
the boot mode may prevent the system from booting if the operating
system is not installed in the same boot mode.
If the operating
system supports UEFI, you can set this option to UEFI. Setting this
field to BIOS allows compatibility with non-UEFI operating systems.
By default, the
Boot Mode option is set to
BIOS.
NOTE: Setting this field to UEFI disables BIOS Boot Settings menu. Setting
this field to BIOS disables the UEFI Boot Settings menu.
Boot Sequence Retry
Allows you to enable or disable the boot sequence retry feature.
If this field is enabled and the system fails to boot, the system
reattempts the boot sequence after 30 seconds. By default, the
Boot Sequence Retry option is set to
Disabled.
BIOS Boot Settings
Allows you to enable or disable BIOS Boot options.
NOTE: This option is enabled
only if the boot mode is BIOS.
UEFI Boot Settings
Allows you to enable or disable UEFI Boot options. The Boot options
include
IPv4 PXE and
IPv6 PXE. By default, the
UEFI PXE boot protocol is
set to
IPv4.
NOTE: This option is enabled
only if the boot mode is UEFI.
One-Time Boot
Allows you to enable or disable a one-time boot from a selected
device.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\