The
Intel AES-In option improves the speed
of applications by performing encryption and decryption using the
Advanced Encryption Standard set and is set to
Enabled by default.
System Password
Allows you to set the system password. This option is read-only
if the password jumper is not installed in the system.
Setup Password
Allows you to set the setup password. This option is read-only
if the password jumper is not installed in the system.
Password Status
Allows you to lock the system password. By default, the
Password Status option is set to
Unlocked.
TPM Security
Allows you to control the reporting mode of the Trusted Platform
Module (TPM). By default, the
TPM Security option
is set to
Off. You can only modify the TPM
Status, TPM Activation , and Intel TXT fields if the
TPM
Status
field is set to either
On with Pre-boot
Measurements
or
On without Pre-boot Measurements.
TPM Activation
Allows you to change the operational state of the TPM. By default,
the
TPM Activation option is set to
No Change.
TPM Status
Displays the TPM status.
TPM Clear
CAUTION: Clearing the TPM results in loss of all keys in the TPM. The loss
of TPM keys may affect booting to the operating system.
Allows
you to clear all the contents of the TPM. By default, the
TPM Clear option is set to
No.
Intel TXT
Allows you enable or disable Intel Trusted Execution Technology.
To enable Intel TXT, Virtualization Technology must be enabled and
TPM Security must be enabled with Pre-boot measurements. By default,
the
Intel TXT option is set to
Off.
Power Button
Allows you to enable or disable the power button on the front
of the system. By default, the
Power Button option is set to
Enabled.
AC Power Recovery
Allows you to set how the system reacts after AC power is restored
to the system. By default, the
AC Power Recovery option is set to
Last.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\