The blade
has USB ports on the front which allow you to connect a USB diskette
drive, USB flash drive, USB DVD/CD drive, keyboard, or mouse. The
USB drives can be used to configure the blade.
NOTE: Your blade supports
only Dell-branded USB 2.0 drives. Use the optional external drive
storage tray to support the drive while in use.
NOTE: If the drive must be
designated as the boot drive, connect the USB drive, restart the system,
then enter the System Setup and set the drive as first in the boot
sequence. The USB device is displayed in the boot order setup screen
only if it is attached to the system before you run the System Setup.
You can also select the boot device by pressing <F11> during system
start-up and selecting a boot device for the current boot sequence.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\