Dell PowerEdge C6320p Owner's Manual

PDF

Back panel features of the PowerEdge 6300 enclosure with PowerEdge C6320p sleds

Back panel features and indicators Intel Phi 72xx processor based sleds — Figure 1. Back panel features and indicators Intel Phi 72xx processor based sleds

Back panel features and indicators Intel Phi 72xxF processor based sleds — Figure 2. Back panel features and indicators Intel Phi 72xx-F processor based sleds

Table 1. Back panel features and indicatorsThe table below illustrates description of the back panel features and indicators
Item	Indicator, Button, or Connector	Icon	Description
1	Power supply unit (2)		Up to two hot swappable 1400 W or 1600 W AC Power supply unit (PSU). NOTE: PSU’s with different wattages cannot be mixed.
2	Universal Serial Bus (USB port)		Use the USB 3.0 port to connect USB devices to the system. This port is a 9-pin, USB 3.0 compliant port.
3	Quad Small Form-factor Pluggable (QSFP port)		Mellanox ConnectX-4 VPI EDR / 100 GbE Embedded Port (optional)
4	Ethernet port		Single Port 1Gb LOM Ethernet port
5	iDRAC Enterprise management port		Use the iDRAC8 Enterprise management port to remotely access iDRAC. For more information, see the Integrated Dell Remote Access Controller User’s Guide at Dell.com/idracmanuals.
6	Micro Universal Serial Bus (USB port)		Use the port to connect the system to a host.
7	VGA port		Use the video/VGA port to connect a display to the system. For more information about the supported video/VGA port, see the Technical specifications section.
8	Power button/power-on indicator		The power-on indicator glows green when the system power is on. The power-on indicator turns amber when there a critical system event occurs. The power button controls the PSU output to the system board. NOTE: When turning on the system, the video monitor can take from several seconds to over two minutes to display an image, on the basis of the disk space available in the system. NOTE: On ACPI-compliant operating systems, turning off the system by using the power button causes the system to perform a graceful shutdown before the system is turned off. NOTE: To force an ungraceful shutdown, press and hold the power button for five seconds.
9	Sled without the integrated Quad Small Form-factor Pluggable port		Sled without the (optional) Mellanox ConnectX-4 VPI EDR / 100 GbE Embedded Port.
10	Sled with the Quad Small Form-factor Pluggable carrier card		Sled with the Quad Small Form-factor Pluggable carrier card and the fabric based processor.