Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Integrated Dell Remote Access Controller 9 Version 3.21.21.21 User's Guide

Updating firmware using remote RACADM

  1. Download the firmware image to the TFTP or FTP server. For example, C:\downloads\firmimg.d9
  2. Run the following RACADM command:
    TFTP server:
    • Using fwupdate command:
      racadm -r <iDRAC IP address> -u <username> -p <password> fwupdate -g -u -a <path>
      path
      the location on the TFTP server where firmimg.d9 is stored.
    • Using update command:
      racadm -r <iDRAC IP address> -u <username> -p <password> update —f <filename>
    FTP server:
    • Using fwupdate command:
      racadm -r <iDRAC IP address> -u <username> -p <password> fwupdate –f <ftpserver IP> <ftpserver username> <ftpserver password> –d <path>
      path
      the location on the FTP server where firmimg.d9 is stored.
    • Using update command:
      racadm -r <iDRAC IP address> -u <username> -p <password> update —f <filename>

    For more information, see the iDRAC RACADM CLI Guide available at www.dell.com/idracmanuals.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\