The front panel of the storage controller contains power and reset switches, and an LCD panel that shows system ID, status and error information.
|Item||Indicator, Button, or Connector||Icon||Description|
|1||Power-on indicator, power button||The power-on indicator lights when the system power is on. The power button controls the power supply output to the system.|
|2||NMI button||Not used for the SC9000.|
|3||System identification button||The identification buttons
on the front and back panels can be used to locate a particular system
within a rack. When one of these buttons is pressed, the front LCD
panel and the back system status indicator flash until one of the
buttons is pressed again.
Press to toggle the system ID on and off.
If the system stops responding during POST, press and hold the system ID button for more than five seconds to enter BIOS progress mode.
To reset the iDRAC (if not disabled in F2 iDRAC setup) press and hold the button for more than 15 seconds.
|4||Video connector||Allows you to connect a display to the system.|
|5||LCD menu buttons||—||Allows you to navigate the control panel LCD menu.|
|6||Information tag||―||A slide-out label panel that records system information such as the Service Tag.|
|7||LCD panel||―||Displays system ID, status information,
and system error messages.
|8||Filler plate||―||Covers empty bay.|
|9||vFlash media card slot||―||Not used for the SC9000.|
|10||iDRAC USB||Connects USB devices to the system or provides access to the iDRAC Direct features. The USB management port is USB 2.0-compliant.|
|11||Management USB||Connects USB devices to the system. The USB management port is USB 2.0-compliant.|
|12||Storage Center OS drive||An internal SSD drive that holds the Storage Center OS.|
|13||Filler plate||―||Covers empty bay.|