Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell PowerEdge FC430 Owner's Manual

PDF

Troubleshooting system memory

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.
NOTE: Before performing the following procedure, ensure that you have installed the memory modules according to the memory installation guidelines for the sled.

Steps

  1. Restart the sled:
    1. Press the power button once to turn off the sled.
    2. Press the power button again to turn on the sled.
      If no error messages appear, go to step 7.
  2. Enter System Setup and check the system memory setting.
    If the amount of memory installed matches the system memory setting, go to step 7.
  3. Turn off the sled using the operating system commands or the CMC.
  4. Remove the sled from the enclosure.
    CAUTION: The memory modules are hot to touch for some time after the sled has been powered down. Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components.
  5. Reseat the memory modules in their sockets.
  6. Install the sled in the enclosure.
  7. Turn on the sled.
  8. Run the appropriate diagnostic test. For more information, see the Using system diagnostics section.
    If the test fails, see the Getting help section.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\