Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip bgp community-list

View routes that a specific community list affects.

Syntax show ip bgp [ ipv4 unicast] community-list community-list-name [exact-match]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view information only related to ipv4 unicast routes.
community-list-name Enter the name of a configured IP community list (maximum 140 characters).
exact-match Enter the keyword for an exact match of the communities.
Command Modes
  • EXEC
  • EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information

The show ip bgp community-list command without any parameters lists BGP routes matching the Community List and the output is the same as for the show ip bgp command output.

The following describes the show ip bgp community-list pass command shown in the following example.

Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column, then local routes exist in the routing table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight.
Path Lists all the ASs the route passed through to reach the destination network.
Example
Dell#show ip bgp community-list pass
                                             BGP table version is 0, local router ID is 10.101.15.13
                                             Status codes: s suppressed, d damped, h history, * valid, > best
                                             Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network
                                             Origin codes: i - IGP, e - EGP, ? - incomplete
                                             
                                             Network     Next Hop      Metric     LocPrf     Weight Path
                                             Dell#
                                          

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\