Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip bgp peer-group

Allows you to view information on the BGP peers in a peer group.

Syntax

show ip bgp [ ipv4 unicast] peer-group [ peer-group-name [detail | summary]]

Parameters

ipv4 unicast	(OPTIONAL) Enter the keywords `ipv4 unicast` to view information only related to ipv4 unicast routes.
peer-group-name	(OPTIONAL) Enter the name of a peer group to view information about that peer group only.
detail	(OPTIONAL) Enter the keyword `detail` to view detailed status information of the peers in that peer group.
summary	(OPTIONAL) Enter the keyword `summary` to view status information of the peers in that peer group. The output is the same as that found in the `show ip bgp summary` command.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The following describes the show ip bgp peer-group command shown in the following example.

Line beginning with:	Description
Peer-group	Displays the peer group’s name.
Administratively shut	Displays the peer group’s status if the peer group is not enabled. If you enable the peer group, this line is not displayed.
BGP version	Displays the BGP version supported.
Minimum time	Displays the time interval between BGP advertisements.
For address family	Displays IPv4 Unicast as the address family.
BGP neighbor	Displays the name of the BGP neighbor.
Number of peers	Displays the number of peers currently configured for this peer group.
Peer-group members:	Lists the IP addresses of the peers in the peer group. If the address is outbound optimized, an * is displayed next to the IP address.

Example ( )

Dell#show ip bgp peer-group
                                             
                                             Peer-group pg1
                                             BGP version 4
                                             Minimum time between advertisement runs is 30 seconds
                                             
                                             For address family: IPv4 Unicast
                                             BGP neighbor is pg1
                                             Number of peers in this group 4
                                             Update packing has 4_OCTECT_AS support enabled
                                             Add-path support enabled
                                             Peer-group members (* - outbound optimized):
                                             1.1.1.5
                                             1.1.1.6
                                             10.10.10.2*
                                             20.20.20.100

Example

Dell#show ip bgp peer-group
                                             
                                             Peer-group RT-PEERS
                                             Description: ***peering-with-RT***
                                             BGP version 4
                                             Minimum time between advertisement runs is 30 seconds
                                             
                                             For address family: IPv4 Unicast
                                             BGP neighbor is RT-PEERS
                                             Number of peers in this group 20
                                             Peer-group members (* - outbound optimized):
                                             12.1.1.2*
                                             12.1.1.3*
                                             12.1.1.4*
                                             12.1.1.5*
                                             12.1.1.6*
                                             12.2.1.2*
                                             12.2.1.3*
                                             12.2.1.4*
                                             12.2.1.5*
                                             12.2.1.6*
                                             12.3.1.2*
                                             12.3.1.3*
                                             12.3.1.4*
                                             12.3.1.5*
                                             12.3.1.6*
                                             12.4.1.2*
                                             12.4.1.3*
                                             12.4.1.4*
                                             12.4.1.5*
                                             12.4.1.6*

Related Commands

neighbor peer-group (assigning peers) — assigns a peer to a peer-group.

neighbor peer-group (creating group) — creates a peer group.