Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

upgrade system

Upgrade the bootflash image or system image.

Syntax

upgrade system {flash: | ftp: | scp: | tftp: | usbflash: | stack-unit {0-5 | all} {A: | B:}

Parameters

0–5	Enter the keyword `0–5` to upgrade only the mentioned stack-unit.
all	Enter the keyword `all` to upgrade all the member units of the stack.
ftp	After entering the keyword `ftp` you can either follow it with the location of the source file in this form: `//userid:password@hostip/filepath`, or press Enter to launch a prompt sequence.
scp	After entering the keyword `scp` you can either follow it with the location of the source file in this form: `//userid:password@hostip/filepath`, or press Enter to launch a prompt sequence.
tftp	After entering the keyword `tftp` you can either follow it with the location of the source file in this form: `//hostlocation/filepath`, or press Enter to launch a prompt sequence.
flash	After entering the keyword `flash` you can either follow it with the location of the source file in this form: `//filepath`, or press Enter to launch a prompt sequence.
usbflash	After entering the keyword `usbflash` you can either follow it with the location of the source file in this form: `//filepath`, or press Enter to launch a prompt sequence.
A:	Enter this keyword to upgrade the bootflash partition A.
B:	Enter this keyword to upgrade the bootflash partition B.

Defaults

none

Command Modes

EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Usage Information

You must reload Dell Networking OS after executing this command. Use the command upgrade system stack-unit to copy Dell Networking OS from the management unit to one or more stack members.

Example

Dell#upgrade system ?
                                             flash:         Copy from flash file system (flash://filepath)
                                             ftp:           Copy from remote file system, IPv4 or IPv6, (ftp:/
                                             /userid:password@hostip/filepath)
                                             scp:           Copy from remote file system, IPv4 or IPv6, (scp:/
                                             /userid:password@hostip/filepath)
                                             stack-unit Sync image to the stack-unit
                                             tftp:          Copy from remote file system, IPv4 or IPv6, (tftp:/
                                             /hostip/filepath)
                                             usbflash:      Copy from usbflash file system (usbflash://
                                             filepath)
                                             Dell#